=====
Views
=====

.. contents:: :local:
  :depth: 1

.. _Webgui-Dashboard:

Dashboard
=========

The dashboard provides a brief overview of the device status.

.. image:: images/dashboard.png
  :width: 800
  :alt: Picture of the Dashboard
  
.. _Webgui-Reboot: 

1. Menu
2. Temperature information
3. Number of connected clients
4. Current state of the device. Details can be found at `Scanner State <../../blickfeld-scanner-lib/protobuf_protocol.html#scanner-state>`__.
5. Click on the 'Reboot' button to reboot the device, which may take up to one minute.

.. _Webgui-Firmware:

Firmware
========

The firmware view is used to upgrade the device firmware and provide information about versions of core packages.

How to update
-------------

1. Download correct firmware from Blickfeld.com
2. Click on the firmware button in the menu (see :ref:`Webgui-Dashboard`). The current firmware version should be displayed
3. Click on "Firmware Update"
4. Select the firmware file downloaded in step 1

Firmware will be installed and the device will reboot.

.. _Webgui-Network-Configuration:

Configuration
=============

Network
-------

In the WebGUI you can change the network configuration of the device.
For an explanation of the network configuration, see: :ref:`Network-Configuration`

Set hostname
~~~~~~~~~~~~

1. Click the "Configuration" button in the menu (see :ref:`Webgui-Dashboard`).
2. Choose "Network" in the submenu (Click on General, which should already be selected)
3. Change the hostname to the desired hostname
4. Click on "Set hostname"
5. Reboot device

Set IPv4 network mode
~~~~~~~~~~~~~~~~~~~~~

1. Click on the "Configuration" button in the menu (see :ref:`Webgui-Dashboard`).
2. Choose "Network" in the submenu
3. Click on "IPv4"
4. Change network mode to desired mode
5. If static is used, enter IP address and subnet mask (see: :ref:`Network-Configuration`)
6. Reboot device

.. _Webgui-Scan-Pattern:

Scan pattern
------------

For an explanation about of our scan pattern see: :ref:`Scan_Pattern`

Edit or generate scan pattern
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

1. Click the "Configuration" button in the menu (see :ref:`Webgui-Dashboard`).
2. Select "Scan pattern" in the submenu
3. Click on "Edit"
4. Change the values (The WebGUI will check the values and provide feedback if the values are not allowed.)
5. Click on "Save and Set"

Save scan pattern
~~~~~~~~~~~~~~~~~

1. Add a unique name for the scan pattern in the "Name" field. (If you select a previously used name it will overwrite the old scan pattern)
2. Click on "Save"

Load scan pattern
~~~~~~~~~~~~~~~~~

1. Click on a previously saved scan pattern in the dropdown menu
2. Click on the "Send to device" button.