About this document¶
This document describes the software tools and libraries used to run the Blickfeld Cube devices.
Note
This document is a supplement to the hardware manual. For information on setting up and handling the hardware of a device, please refer to the printed manual supplied with the Cube and on the Blickfeld website under www.blickfeld.com/resources/
If you are interested in acquiring a Blickfeld device, please contact Blickfeld GmbH
For feedback or support, please contact the Blickfeld Support.
This document was compiled on 09.12.2020.
Version history¶
Manual |
Firmware |
BSL |
WebGUI |
LidarView |
Blickfeld-Recorder |
ROS1 |
ROS2 |
|---|---|---|---|---|---|---|---|
v1.2.1 |
v1.16.1 |
v2.15.0 |
v0.16.2 |
v4.2.1 |
v0.4.1 |
v1.2.1 |
v1.2.2 |
v1.16.1 |
v2.15.0 |
v0.16.1 |
v4.2.1 |
v0.4.1 |
v1.2.1 |
v1.2.2 |
|
v1.15.0 |
v2.14.1 |
v0.15.1 |
v4.2.1 |
v0.4.1 |
v1.2.1 |
v1.2.1 |
|
v1.13.3 |
v2.13.0 |
v0.13.2 |
v4.2.1 |
v0.4.1 |
v1.2.1 |
v1.2.1 |
|
v1.12.0 |
v2.12.1 |
v0.12.0 |
v4.2.1 |
v0.4.1 |
v1.2.1 |
v1.2.1 |