About this document
This document describes the software tools and libraries used to run the Blickfeld Cube devices.
Note
This document is a supplement to the hardware manual. For information on setting up and handling the hardware of a device, please refer to the printed manual supplied with the Cube and on the Blickfeld website under www.blickfeld.com/resources/
If you are interested in acquiring a Blickfeld device, please contact Blickfeld GmbH
For feedback or support, please contact the Blickfeld Support.
This document was compiled on 22.11.2021.
Version history
Manual |
Firmware |
BSL |
WebGUI |
LidarView |
Blickfeld-Recorder |
ROS1 |
ROS2 |
---|---|---|---|---|---|---|---|
v1.6.4 |
v1.24.2 |
v2.19.6 |
v0.20.1 |
v4.2.1 |
v0.4.1 |
v1.4.3 |
v1.3.1 |
v1.24.1 |
v2.19.6 |
v0.20.1 |
v4.2.1 |
v0.4.1 |
v1.3.2 |
v1.2.4 |
|
v1.21.2 |
v2.19.5 |
v0.20.1 |
v4.2.1 |
v0.4.1 |
v1.3.1 |
v1.2.4 |
|
v1.21.1 |
v2.19.5 |
v0.20.1 |
v4.2.1 |
v0.4.1 |
v1.2.3 |
v1.2.4 |
|
v1.21.1 |
v2.19.5 |
v0.20.1 |
v4.2.1 |
v0.4.1 |
v1.2.3 |
v1.2.4 |