Blickfeld Recorder
The Blickfeld Recorder can record point clouds from a Blickfeld LiDAR in any of the supported formats in real time. (see Supported formats). The Blickfeld Recorder can also convert existing point clouds between any of these formats.
Supported formats
The Blickfeld Recorder fully supports the following formats:
bfpc - the native format of Blickfeld LiDARs
vtu - for ParaView and LidarView
csv - a readable, all-purpose format
Download and Installation on Windows
The Windows installer can be found here: Blickfeld Resources. Please download this package, run the installer and follow the instructions.
Usage
The Blickfeld Recorder can either record Blickfeld Cube point clouds in real time or convert existing point clouds files to other supported formats.
Point Cloud Recording
Select the Record task according to Figure 1.
Enter the hostname or IP address (see: Network configuration).
Select the Output directory and the desired Output format.
Click on Start Recording to start recording (dumping). The recorded frames are written to the given directory.
To stop recording press Stop Recording.
Hint
The best results can be achieved by recording to Blickfeld’s binary .bfpc format.
Figure 1. Recording a point cloud. |
Figure 2. Converting existing point clouds. |
Point Cloud Conversion
Select the Convert task according to Figure 2.
Select one or more files to convert.
Select the Output directory and the desired Output format.
Click on Start Conversion to start point cloud conversion. The resulting frames are written to the given directory.
To abort the conversion press Stop Conversion.
Figure 3. Example of input for recording. |
Figure 4. Example of input for converting. |
Other operating systems
Please contact the Blickfeld support team to enquire on the status of builds for Linux or macOS.